Home / Workbenches

Workshop planning

Will a workbench fit your garage?

Check an assembled bench against your usable wall width, the nearest obstruction, drawer travel and the working room you choose.

The initial numbers are an example. Replace them with your measurements. All fields use the selected unit.

Try a listed footprint:

How the calculation works.

Required depth = bench depth + extra drawer or tool projection + your chosen working room. The calculator adds these allowances so you can reserve standing space while the projection is extended. Width is checked separately against the available wall run.

With 72 inches of clear depth, a 24-inch bench, no extra projection and 36 inches of chosen working room, the depth allowance is 60 inches, leaving 12 inches. Those numbers are an example, not a recommendation for your task or a safety minimum.

Measure the narrowest usable space.

  1. Park normally. Measure to the actual obstruction, not an empty garage.
  2. Check multiple heights. A bumper, shelf, door track or top-mounted tool may project differently from the floor.
  3. Use assembled dimensions. Include handles and accessories. Shipping size and folded size are different measurements.
  4. Allow for the project. Long stock, clamps, a drawer or a tool feed path may need more room than the bench.
  5. Walk through the layout. Check doors, escape routes and daily storage access separately.

What a passing result means.

It means the entered rectangle and allowances fit the entered space. It does not certify the bench, framing, electrical installation, posture or tool operation. The calculator cannot detect an omitted obstruction or an incorrect measurement.

Use the supplied bench and tool instructions to assess the actual setup. If the result is tight, remeasure and mock up the footprint before buying.

Compare the two workbenches →Folding or assembled?