Home / Small-parts storage

What to organize

Keep thread families readable and matching parts together.

Build a labelled hardware collection around the identifiers you already have, with dedicated space for project sets.

Nuts & bolts

Separate an existing nut-and-bolt collection without losing its identifying information.

Metric hardware
Inch hardware
Matched project sets
Example label layout · original planning illustration, not a product photograph. These labels show a sorting idea, not compatible parts or a supplied organizer configuration.

Build a system you can keep using

  1. Keep labelled metric and inch groups separate.
  2. Give common nuts their own compartments; keep a complete project set together when that is more useful.
  3. Retain the original identifiers instead of relabelling every silver-looking item as the same hardware.

What belongs on the label

  • Metric or inch designation from packaging
  • Thread designation
  • Bolt length
  • Grade, material or other original identifier

Check the fit before filling it

Keep it looking put together. Use consistent labels with room for the full thread designation. A clear separation line between families is easier to scan than scattered duplicate boxes.

Avoid: Using the storage layout as a compatibility or strength chart.

Researched options for this approach

Product illustrations are labelled schematics. Check each brief for fit limits and primary sources.

01DEWALT DWST14825 Deep Pro Organizer

For carrying selected hardware to a project

DEWALT DWST14825

A portable removable-cup format for hardware that needs to leave the bench. Choose it around the parts you carry and the space needed to open the case; tiny-part containment has not been tested by GarageFlow.

Best for
Project kits that travel between a shelf and the work area
Capacity
10 removable cups (manufacturer)
Size
Exterior dimensions unconfirmed; check the selected model
Installation
Easy
01Akro-Mils 10144 44-Drawer Storage Cabinet

For labelled hardware beside a fixed bench

Akro-Mils 10144

A stationary drawer format for separating many hardware groups. Its shallow body can suit a bench-side layout, but plan drawer withdrawal and readable labels rather than relying on the cabinet footprint alone.

Best for
Repeat access to many small labelled groups at a fixed work area
Capacity
44 drawers: 32 small + 12 large
Size
20 W × 6⅜ D × 15 13/16 H in (manufacturer table)
Installation
Easy

Connected organizing ideas

Washers

Keep matching project hardware near its associated washers.

Build the whole system →Print a planning sheet →Compare storage formats →

Editorial organization planning, not hands-on product testing or a tool/part compatibility guide. Retain original identifiers and follow the applicable product instructions.