Home / Small-parts storage

What to organize

Stop small flat parts from becoming a mixed layer.

Separate washer types and sizes into shallow, readable groups that are easy to pick from.

Washers

Choose compartment depth and labels for an existing washer collection.

Flat washers
Lock washers
Project sets
Example label layout · original planning illustration, not a product photograph. These labels show a sorting idea, not compatible parts or a supplied organizer configuration.

Build a system you can keep using

  1. Sort by known type before sorting by size.
  2. Use a compartment that lets you see and retrieve a small quantity.
  3. Put rare or unidentified leftovers in a separate labelled group instead of mixing them into known stock.

What belongs on the label

  • Type from the original package
  • Size designation
  • Material or finish
  • Associated project, when relevant

Check the fit before filling it

Keep it looking put together. Shallow groups and short front labels make the collection legible without filling every compartment to the top.

Avoid: Letting an oversized deep bin hide the last few small washers.

Researched options for this approach

Product illustrations are labelled schematics. Check each brief for fit limits and primary sources.

01Akro-Mils 10144 44-Drawer Storage Cabinet

For labelled hardware beside a fixed bench

Akro-Mils 10144

A stationary drawer format for separating many hardware groups. Its shallow body can suit a bench-side layout, but plan drawer withdrawal and readable labels rather than relying on the cabinet footprint alone.

Best for
Repeat access to many small labelled groups at a fixed work area
Capacity
44 drawers: 32 small + 12 large
Size
20 W × 6⅜ D × 15 13/16 H in (manufacturer table)
Installation
Easy

Connected organizing ideas

Nuts & bolts

Connect washers to matching project storage without assuming interchangeability.

Build the whole system →Print a planning sheet →Compare storage formats →

Editorial organization planning, not hands-on product testing or a tool/part compatibility guide. Retain original identifiers and follow the applicable product instructions.